H pattern pneumatic shifter parts list

Controller:

Arduino model: FINDER ARDUINO OPTA ADVANCED (8A.04.9.024.8320)      

Inputs:

INPUT 1:  + UP   12V SWITCH

INPUT 2:  - DOWN 12V SWITCH

INPUT 3:  Y DISTANCE SENSOR

INPUT 4:  X DISTANCE SENSOR

Outputs:

OUTPUT 1:  ACTUATOR YMAX 45MM (UP)  

OUTPUT 2:  ACTUATOR YMIN 0MM (DOWN) 

OUTPUT 3:  ACTUATOR XMAX 40MM (RIGHT)  

OUTPUT 4:  ACTUATOR XMIN 0MM (LEFT)

Pneumatic cylinders:

2x MINI AIR CYLINDER CDJ2B10 XC8                                               

Solenoids:

2x SOLENOID 4V130-06 3 POSITION 5 PORT PNEUMATIC CONTROL VALVE    

Sensors:

2x Turck LI50P1-Q17LM1-LIU5X2-0.3-RS5 — Order 1590725                   

Step up voltage regulator 12v->24v:

Victron Orion-Tr 12/24-5A (120W) Isolated DC-DC converter ORI122410110

12v Distribution fuses block

Pneumatic handbrake for drifting

Control modules - No control modules, just an active on/off switch.

Air system - Compressor, lines, fittings, manifold, solenoids, pressure regulator and actuators.

Actuators - Non-rotating double acting double rod and two position cylinder rod.  

Solenoids - 5 port, 4 way, 2 positions.

H Pattern Shifter

Actuators

• Mini 50-200mm T6 linear slide acutator 50mm T6 motor stepper

• Mini Acutuator ROBO cylinder (Intelligent-Actuator)

LCD 1602 Module

Arduino four channel 12v relay module

Duinotech UNO R3 Microcontroller

400 Breadboard/Printed circuit board/Protoyping board

Switch buttons

Battery and connector

Wires and LEDs

*WORK IN PROGRESS*